ISO 9001:2015
Certificate Registration No.: 44100 2093 0027
ISO 9001:2015
Certificate Registration No.: 44100 2093 0027
100W, Universal Input UPS/Battery ChargerThe BCH 100 is a compact DC output UPS system with external battery. The built-in battery charger provides 100W total power for the output and for float charging the battery. The unit has a low battery disconnect circuit to prevent damage to the battery by low discharge during prolonged AC failure. A built-in charger fail alarm (Fail Close) indicates either failure of the charger circuit or loss of AC input power. Any additional options are eliminated to keep the cost for this series low. The battery input is protected against accidental reverse battery connection by a crossbar diode and internal safety fuse. The battery must be fused externally directly to the battery. Low component count and the use of components with established reliability result in a high MTBF. The unit is manufactured at our plant under strict quality control.
150W, Universal Input UPS/Battery ChargerThe BCH 150 is a compact DC output UPS system with external battery. The built-in battery charger provides 150W total power for
the output and for float charging the battery. The unit has a low battery disconnect circuit to prevent damage to the battery by low discharge during prolonged AC failure. A built-in charger fail alarm (F/O or F/C) indicates either failure of the charger circuit or loss of AC input power. The battery input is protected against accidental reverse battery connection by a crossbar diode and internal safety fuse. The battery must be fused externally directly to the battery. Low component count and the use of components with established reliability result in a high MTBF. The unit is manufactured at our plant under strict quality control.
300W, Universal Input UPS/Battery ChargerThe BCH 300 is a compact DC output UPS system with external battery. The built-in battery charger provides 300W total power for the output and for float charging the battery. A built-in charger fail alarm (Form C) indicates either failure of the charger circuit or loss of AC input power. The battery input is protected against accidental reverse battery connection by a crossbar diode. The battery must be fused externally directly to the battery. Low component count and the use of components with established reliability result in a high MTBF. The unit is manufactured at our plant under strict quality control.
The BCH-MO1 is a configurable battery charger system designed to accommodate a wide range of requirements. It is comprised of a 4U(6.97”) x 19” x 7” chassis and an internal rectifier module. The BCH-MO1 can be configured for charging 12V, 24V, 48V, 120V or other types of batteries. Depending on electrical performance requirements, the internal modules would typically provide 300W, 500W, or 750W.
Internal modules are housed in vented, enclosed packages which provide EMI shielding and contribute to the charger meeting EN55022 Class B EMI requirements. Two analog meters on the front-panel of the chassis monitor output voltage and current. The battery and AC-input breakers are located on the front panel. Other indicators include a green charger ‘Good’ LED, a green Battery ‘Good’ LED, a red charger ‘Low’ LED and a red battery ‘Fail’ LED. The BCH- MO1 has three mounting options: a rack-mount option, a bench-mount and a wall-mount option. These are illustrated in photograph above.
Designed and developed by WebFocus Solution Inc. and hosted by ServoBox. 2014